**Silo System:**
* Year: 1998 (approx.)
* Capacity: (2) 200 ton
* Stationary
* The two (2) Standard Havens silos are a nominal 200 tons each.
* Each silo has four inches of insulation on the sidewalls and cone and six inches on the top.
* Sixteen gauge galvanized metal wrapper covers the insulation and the 12’ square top is checker plated for antiskid.
* The 6-ton round anti segregation batchers are mounted to the top.
* Electrically heated cones with electrically heated double gates.
* There are high and low bindicators for material level indicators.
**Conveyor:**
300TPH- 36" wide x 36” deep and 88’ long and is rated at 300 tph
* Seventeen floating bearings located at five-foot intervals on the sidewalls to allow the slat to move up and over any floor obstruction to prevent damage to the chains or slats.
* There is a mix reject gate in the floor. A 100 hp motor and a REX Neptune gear reducer power the conveyor.
* There are stairs (1) one side of the conveyor to make maintenance easier.
* There is hot oil heat on the sub-floor covered by insulation and metal covers and oil heat on the boot of the silo.
*Notes:
The pads on the silo legs were removed when the system was taken down, the silo cones and barrel walls look to need some repairs. The Silo Cones will need to relined. And there is (NO SILO TRANSFER). The silo's are down on the ground however there will be a $5,000.00 crane charge to load on buyers trucks.