**Make**: Appco Sand Box **Storage**: 4000 cubic ft/ 190 tons/ 148 cubic yards **Year**: 2010 **Other Info**: * Has a belt running from the bottom out the back * 4 hoppers * 6 cylinder Diesel engine runs it all * Rear discharge conveyer * Spring suspension * Digital display management * The Frac Sander Unit is a trailer mounted sand storage and delivery system for feeding proppant to the sand hopper of a fracturing blender * This unit uses a corrugated sidewall conveyor belt with four (4) proppant compartments with a rear mounted discharge chute * This unit is designed for operation in the oilfield environments in temperature ranges from 0 degrees C to 50 degrees C (32 degrees F to 122 degrees F) * This unit is self-contained for unit operation and shall be designed to work in a complete frac spread for fracturing operations * Please take a good look at the pictures and call with any questions * Has 4 compartments 585 cu/ft and 820 cu/ft and 1210 cu/ft and 1210+ cu/ft * 10,879 hours * Two axle portability **Shipping Dimensions: 63 ft. long and 11 ft. wide oversized load**

**Make:** Halliburton **Capaity**: 500BBL **Portable** **Other:** * Silo is mounted on a portable Tandem Axle chassis. * Running lights are recess mounted on the bottom of the self erecting plate that supports the Silo. * Electric power is generated via solar cells mounted on the top of the Silo. * Once the Silo is erected, Sand can be emptied in a 360 degree direction via twin chutes mounted beneath dual outlets on the base of the silo. * The Silo outlets are opened and closed by (2) linear actuators. * The Chutes beneath the discharge openings are designed to discharge sand at near ground level. * If sand needs to be conveyed away from the Silo discharge openings, then the chutes should be eliminated and replaced with 10” to 14” Augers of an appropriate length mounted beneath the Silo discharge openings. * New this unit goes for $280,000

**Make**: Sand King **Mode**l: FS40 **Year**: 2008 **Size**: 190 tons, 148 Cubic Yards **Portable** **Other**: * FS40 Sand King Frac Sand Silo w Conveyors for Oil Field * Powered by a 6 cylinder diesel * Has 4 storage bins and an underbody conveyor * Rear discharge conveyor * Spring suspension * 10879 hrs. on engine * Digital display management. * The Frac Sander Unit is a trailer mounted sand storage and delivery system for feeding proppant to the sand hopper of a fracturing blender * This unit uses a corrugated sidewall conveyor belt with four (4) proppant compartments with a rear mounted discharge chute * This unit is designed for operation in the oilfield environments in temperature ranges from 0 degrees C to 50 degrees C (32 degrees F to 122 degrees F) * This unit is self-contained for unit operation and shall be designed to work in a complete frac spread for fracturing operations * Please take a good look at the pictures and call with any questions * Has 4 compartments 585 cu/ft and 820 cu/ft and 1210 cu/ft and 1210+ cu/ft * 10,879 hours * Two axle portability **Shipping Dimensions**: 63 ft. long and 11 ft. wide oversized load

**Other**: * Bins with overhead trolley fill * 8 Large * 5 Smaller * Was used for 2 years on a brick making plant * ceramic lined * level indicators * still erected * NEW cost over 1 million. **Rough Dims**: * Small: 8' w x (10'T + 6'T Cone) * 600 cubic feet. 150 barrels. 26 tons * Large: 11'4"w x (24'T +10'T Cone) * 3,000 cubic feet. 700 barrels. 130 tons. MAKE REASONABLE OFFER.