Asphalt Plant Equipment For Sale - New & Used Asphalt, Concrete & Crushing Plants

**Make:** Gencor **Type:** Reverse Air Portable Baghouse **Model:** CFP116 **Project Number**: 53497 **Serial Number**: BHCFP116-53497-97-2A **Specifications:** * Approx. ACFM: 57,099 * Cloth area: 11,605 sq. ft. * Reverse air system * Double-auger dust discharge system * WEG 200 HP drive * Adjustable damper on fan * Fold-down stack for portability * Two entry air ductwork elbows (4' 7" diameter) * Extra cages (7' 2" long x 6" wide) * Two-axle with ggod tires but does need brake lines,brakes and air tanks. **Condition:** This unit appears to be complete and in above-average condition. **Approximate Dimensions:** Overall width: ~12' Overall length: ~55' Overall height: ~13' 9" (with handrails folded down)

Portable Baghouse Pulse-Jet Front Knock Out Box (Dirty Air Side) Top Removal Bags 580 6" x 8' Bags = 7,284 TSQF of Cloth 232 6" x 5' Bags = 1,821 TSQF of Cloth 14 bags per row, 10- 8' bags and 4-5' per row Total Square Foot of Cloth 9,105 9105 @ 6.1 = 54,630 ACFM (IF All BAGS ARE MADE 6'X 8' BAGS @ 812 BAGS = 10,198 TSQF OF CLOTH THAT WOULD BE 61,191 @6.1) Twin 125 HP Motors on Fan Triple Auger Dust Discharge to a Single Incline Auger Sullair Rotary Screw Compressor W/ 500 Gallon Air Tank Nema Electrical Box Triple Axle (With Tires And Rims) 2-Large Landing Pontoons Baghouse in Good Condition Ready to go to work (Augers Look Good And Knock Out Box Looks Good)

(448) BF-ENVOPBAG - 5'' Diameter x 96'' Length, Snapband to fit a 5 1/4'' Tubesheet, Disc Bottom, 14 oz Aramid Material (280) BF-ENVOPBAG84 - 5'' Diameter x 84'' Length, Snapband to fit a 5 1/4'' Tubesheet, Disc bottom, 14 oz Aramid Materials (100) BCG-ENVOPCG96 - TYPE: Top Load, DIAMETER: 4.875'', LENGTH: 95.5'', MATERIAL: Galvanized, TOP: Turn Down Flange, VENTURI: 6'', BOTTOM: Welded Pan, VERTICAL WIRES: 10, RING SPACING: 8'' (75) BCG-ENVOPCG84 - TYPE: Top Load, DIAMETER: 4.875'', LENGTH: 83.5'', MATERIAL: Galvanized, TOP: Turn Down Flange, VENTURE: 6'', BOTTOM: Welded Pan, VERTICAL WIRES: 10, RING SPAVING: 8''

Baghouse Cederapids Approx 58,000 - 70,000acfm appox 70,000acfm @ 6:1 63,448acfm @ 5.5:1 58,833acfm @ 5.1:1 Pulsejet Came off of 400tph plant Model#: CX1716 Surface Rust on Top Doors Portable 3 axle tire size (11 - 22.5) Slat bottom discharge 7.5hp auger for slat bottom Has extra bag Bag Size: 6'’ x 11’ bags 668 Bags Sqft of Cloth: 11,536 (2) 150hp fan motors Sullair 3700 Compressor Baghouse just came down June 2024, being replaced with new larger baghouse Unit now down on the ground, road readiness needs to be checked.

Dustex SN: 80615 With 100hp Fan 5 Pieces of Ductwork Partially Portable 2 Axle 2 Compressors 2 Section (1 Section is Portable, Other is Not) 3 Augers

Make: CMI Model: RA318 Portable Roto Aire Exhaust Fan and Stack Approx 61,000acfm There is a fire slam damper in the ductwork between the dryer and the baghouse. The portable CMI reverse air baghouse has 3 sections of bags 756 total bags; each bag is 5" 1/4 wide #756 Oval 3 pocket bags 7'Long.. There is a total of 13,608 square feet of cloth that will effectively filter 61,236 cfm of dust-laden air at a 4 .5:1 air.

Astec Baghouse 1976 SFC-56 776-006 The bag house there are 18 sections in the bag house. 33 bags per section Bags are 6 1/2 X 122” total of 594 bags. Total SQFT of cloth 10,270 61,621 @ 6.1 ACFM 52,378 @ 5.1 ACFM The bags have been stored in a van since the bag house was shut down. Zip Code in location is for state capital, please contact ASI directly for more specific location.

Make: ACFM: 1,400 Pulse-Jet Top removal Bags Hopper with Tripple Valve 25 bags 6'x6" 5hp Motor Cincinnati Fan (Model RBE-11) No Stand Zip Code in location is for state capital, please contact ASI directly for more specific location.

Make: IdealTFC Year: 2019 Filter Surface Installed: 880 m2 Power Fine Screws: 1 x 5hp

54,000 stansteel baghouse Fan 125 hp Ductwork Pulse Jet BRING ALL OFFERS

**Output:** 94, 849 cfm @ 5.1:1 **Bag Count**: 4 rows of 16 bags (1280 bags total) **Bag Size**: 4 – 5/8” x 10’ **Stationary** **Other:** * 18,598.23 sq ft cloth * 20 sections Unit on the ground and ready for loadout Astec Stationary Baghouse 94,000 CFM 20 sections 4 rows of 16 bags 1280 bags total 4-5/8” x 10’ bags (2) 200-hp motors fan 18,598.23 sq ft cloth 94, 849 cfm @ 5.1:1 Not insulated Year 1987 Serial 87-148 Bags will all likely need replacing Fan motors will need to be checked All pulse valves could use a new gasket kit. Bags and cages are still inside Zip Code in location is for state capital, please contact ASI directly for more specific location.

Binvent (Baghouse) Box 4'x 4' x 10' Pulse-Jet 16 Bags 6" x 5' Top Removal

**Make:** Barber Greene **Model:** CE12x165 **ACFM:** 41,500 **Bag Count:** 600 **Bag Size:** 6'' x 8' **Other Info:** * Portable * Pulse-Jet * 7,540 Total Sqft of cloth. * Top Removal Bags. * Twin Auger Discharge with 15 hp motors. * Tandem Axle (6 lug rims with 10.00 x 20R Tires). Road readiness will need to be checked by professionals * Has control cabinet on the side with modules. * 50,000 acfm exhaust fan **(Missing 2 motors, 75-100HP).** * Has connecting duct-work to the drum/dryer Zip Code in location is for state capital, please contact ASI directly for more specific location.

Make: Delta Design & Fabrication, Inc. Model: S-BB-2/20-2/1.5HP Serial: S-BB-2-20-00-28-01 Zip Code in location is for state capital, please contact ASI directly for more specific location.

35,000acfm cyclone Came off a H&B 30,000ACFM baghouse Unit on ground and ready fro loadout

Cyclone Off 350-400tph drum plant Recently ceramically lined

**Make**: Barber Greene **ACFM:** 25,000acfm **Other Info**: * Wet scrubber * Off of a DM50 Plant Zip Code in location is for state capital, please contact ASI directly for more specific location.

**Brand:** Barber Greene **SN:** 14Y1UO **ACFM:** 70,000 **Other Info:** * Portable * High Capacity Dual Circuit Exhaust Fan Dust Collector System(SN: 14Y1UO). * With dual 100 HP Electric Fan Drives, mounted on T/A Drop Deck Trailer. * Portable High Capacity Hot Plant Dust Collector/Scrubber w/dual blower intake ducts, emissions stack, water injection, venturi wet misters, and all tube and duct attachments. **Tank Thickness:** * (Front) .21 * (Middle) .20 * (Back) .20 Note: Trailer not included with fan Zip Code in location is for state capital, please contact ASI directly for more specific location.